home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Turnbull China Bikeride
/
Turnbull China Bikeride - Disc 2.iso
/
BARNET
/
FREENET
/
CARPENTER
/
SFTP041R
/
!sFTP
/
Resources
/
Messages
< prev
next >
Wrap
Text File
|
1998-02-04
|
13KB
|
301 lines
_TaskName:sFTP
NoName:Unspecified profile name
NoHost:Unspecified profile host name
NoLogin:Unspecified profile login name
NoPass:Unspecified profile password
Frontend1:You need to enter a profile name in the profile dialog box if you wish to save the current profile.
Frontend2:You have not yet specified an FTP site or IP address.
Frontend3:Profile name already exists. Overwrite ?
Frontend4:Specified local directory does not exist.
Frontend5:The specified 'Default transfer directory' does not exist. Configuration not saved.
Frontend6:The specified Local Directory does not exist.
# Task messages
1.TaskName:sFtp
# Error messages
err.msg1:Failed to initialise properly, exiting.
err.msg2:Failed to close the current session properly.
err.msg4:Not connected.
err.msg5:You must close the current session first.
err.msg6:Load failed.
err.msg8:Site not specified.
err.msg9:Unknown client command.
err.msg10:No login id specified - closing connection.
err.msg11:Directory does not exist.
err.msg12:Error creating socket and port.
err.msg13:Unable to create a Socket.
err.msg14:Unable to gethostbyname.
err.msg15:Unable to connect to host '%s'.
err.msg16:Unable to connect to host '%s' reason unknown.
err.msg17:Error getting ip number.
err.msg18:Error replying to inital connection.
err.msg20:No password specified - closing connection.
err.msg21:Too many parameters supplied.
err.msg22:No parameters supplied. Two needed.
err.msg24:No help available.
err.msg25:Unable to open profile '%s'.
err.msg26:Failed to %s from server %s properly.
err.msg27:Filename '%s'
err.msg28:Unable to establish new connection.
err.msg29:Failed to allocate a free socket.
err.msg31:Error getting local address.
err.msg32:Error getting local port.
err.msg33:Filename '%s' already exists.
err.msg34:Ambiguous command.
err.msg35:Too many parameters.
err.msg36:Not enough parameters.
err.msg37:No files were found matching the filespec '%s'.
err.msg38:Overwrite (y/n) ?
err.msg39:does not exist.
err.msg40:%s is not a file.
err.msg41:Lookup failed - a call to the TCP/IP stack failed.
err.msg42:Error in xdnsresolver_start.
err.msg43:Unable to create a master socket.
err.msg44:Unable to establish the IP address of the control connection.
err.msg45:Unable to establish the local port number of the listening socket.
err.msg46:The port command was not successfully acknowledged.
err.msg47:Abort command has been sent, awaiting confirmation.
err.msg48:Unable to save profile name '%s'.
err.msg49:This server has not implemented the HELP command.
err.msg50:WimpExtLib failed to initialise properly, exiting.
err.msg51:Unknown command.
err.msg52:Ambiguous command.
err.msg53:Not connected.
err.msg54:You must first close the current session.
err.msg55:Not enough paramaters.
err.msg56:Too many parameters.
err.msg57:Unable to create file '%s'
err.msg58:No address was found.
err.msg59:Error message '%s' missing from '%s' file.
err.msg60:get aborted.
err.msg61:Profile name '%s' already exists.
err.msg62:No such file or directory.
err.msg63:Directory "%s" does not exist.
err.msg64:You have reached the top level - Directory unchanged.
err.msg65:Unable to determine filespec.
err.msg66:Connection to mastersocket has failed.
err.msg67:You cannot reget a file that does not yet exist on the local system.
err.msg68:Use 'get' instead.
err.msg69:This server does not support the append command.
err.msg70:This server does not support unique filenames.
err.msg71:Switching runique off and aborting the put.
err.msg72:This server does not support the MDTM command
err.msg73:used to determine the datestamp.
err.msg74:Switching putnewer off and aborting the put.
err.msg75:The file you wish to put is the same or older than the one on the remote host.
err.msg76:Aborting the put.
err.msg77:Nothing to list that matches '%s.%s'.
err.msg78:The !Scrap utility has not yet been seen by the filer.
err.msg79:Unable to create a temp directory within !Scrap
# Information messages
info.msg1:Session closed. Please close the window.
info.msg2:Closing connection.
info.msg3:Profile successfully saved.
info.msg4:Hash display has been turned off.
info.msg5:Hash display has been set to
info.msg6:Verbose mode is set to On.
info.msg7:Verbose mode is set to Off.
info.msg8:Local direcory has been changed to '%s'
info.msg9:Current local directory is set to
info.msg10:Bell status set to off.
info.msg11:Bell status is set to on.
info.msg12:Prompt mode is set to On.
info.msg13:Prompt mode is set to Off.
info.msg14:Remote unique filenames is set to Off.
info.msg15:Remote unique filenames is set to On.
info.msg16:Renaming file '%s' to '%s'
info.msg17:Profile not saved.
info.msg18:AffectCSD is set to On.
info.msg19:AffectCSD is set to Off.
info.msg20:Syslog logging level set to %d
info.msg21:Unique local filenames mode is set to Off.
info.msg22:Unique local filenames mode is set to On.
info.msg23:Get newer files only is set to Off.
info.msg24:Get newer files only is set to On.
info.msg25:Put newer files only is set to Off.
info.msg26:Put newer files only is set to On.
info.msg27:"%s" is the current local hard disk directory.
info.msg28:New current local directory "%s".
info.msg29:Filelist for Directory '%s.%s'.
info.msg30:PORT mode selected.
info.msg31:PASV mode selected.
# Information messages for Help
desc.!:Carry out a shell command. e.g. !cat
usage.!:!command
desc.?:Display help on client commands.
desc.?:A synonym for help.
usage.?:?[ command]
desc.a:Carry out a shell command. e.g. *cat
usage.a:*command
desc.abort:To abort the current download.
usage.abort:abort
desc.account:Supply a supplemental password required by a remote system
desc1.account:for access to resources once a login has been successfully
desc2.account:completed.
usage.account:account [passwd]
desc.affectcsd:Toggles on and off - using the actual CSD or just a
desc1.affectcsd:copy of it.
usage.affectcsd:affectcsd
desc.append:Append a local file to a file on the remote machine.
usage.append:append local-file [remote-file]
desc.ascii:Set the file transfer type to ASCII.
usage.ascii:ascii
desc.bell:Turn on bell notification when end of file transfer.
desc1.bell:Default = nobell.
usage.bell:bell
desc.binary:Set the file transfer type to BINARY.
usage.binary:binary or bin or image
desc.bye:Exit the program closing any open session.
desc1.bye:A synonym for quit.
usage.bye:bye
desc.cd:Change directory on remote host to remote-directory.
desc1.cd:Also 'cd ..' is a synonym for cdup.
usage.cd:cd remote-directory
desc.cdup:Change directory on remote host to the parent of the current directory
desc1.cdup:on the remote host.
desc2.cdup:Same as 'cd ..'.
usage.cdup:cdup
desc.chmod:Change the permission modes of the filename on the remote
desc1.chmod:system to mode.
usage.chmod:chmod mode filename
desc.close:End the current ftp session.
usage.close:close
desc.debug:Sets the system logging level for !syslog
desc1.debug:Set debug to 0 to switch off logging altogether.
usage.debug:debug nnn Where nnn is a number between 0 and 255 inclusive.
usage1.debug: 0 turns off debugging
desc.delete:Attempts to delete the file(s) on the remote host.
usage.delete:delete filename or delete filespec* or delete -r directory
desc.dget:Attempts to get an entire directory and all its subdirectories.
usage.dget:dget remote-dir [local-dir]
desc.dir:List the contents of the remote directory specified or the current
desc1.dir:remote directory if no directory is specified.
desc2.dir:A synonym for ls -l.
usage.dir:dir [remote-directory] [>local-file]
desc.downloads:Opens the currently selected downloads directory.
desc1.downloads:Or beings it to the front if it is already open but obscured.
usage.downloads:downloads
desc.exit:Exit the program closing any open session.
desc1.exit:A synonym for quit.
usage.exit:exit
desc.get:Retrieve the remote-file and store it on the local machine.
usage.get:get remote-file [local-file]
desc.getnewer:If on, download only files with a newer date and timestamp.
usage.getnewer:getnewer
desc.help:Display help on client commands.
usage.help:help [command]
desc.image:Set the file transfer type to binary.
desc1.image:A synonym for binary.
usage.image:image
desc.index:Recursively lists the entire tree structure from the current remote
desc1.index:server directory.
usage.index:index [>filename]
desc.lcd:Change directory on the currently selected local hard disk
desc1.lcd:to local-directory.
usage.lcd:lcd local-directory
desc.lcdup:Change directory on the local host to the parent of the current local
desc1.lcdup:directory.
usage.lcdup:lcdup
desc.ldir:List the contents of the currently selected local hard disk directory.
desc1.ldir:A synonym for lsl -l.
usage.ldir:ldir [local-directory]
desc.lls:List the contents of the local hard disk specified or the current
desc1.lls:local hard disk directory if no directory is specified. The
desc2.lls:switch -l lists full information.
usage.lls:lls [local-directory] [-l]
desc.logout:End the current ftp session.
desc1.logout:A synonym for close.
usage.logout:logout
desc.lpwd:Display the name of the current working directory on the local
desc1.lpwd:machine, where files will be downloaded to, unless absolute
desc2.lpwd:paths are used.
usage.lpwd:lpwd
desc.ls:List the contents of the remote directory specified or the current
desc1.ls:remote directory if no directory is specified. The switch -l
desc2.ls:lists full information, the >local-file will save the list as a file.
usage.ls:ls [remote-directory] [-l] [>local-file]
desc.lunique:lunique
usage.lunique:Toggles use of unique local filenames.
desc.mdir:Attempts to create a new directory on the remote host.
desc1.mdir:A synonym for mkdir.
usage.mdir:mdir directory-name
desc.mget:Retrieve multiple files matching the wildcard.
usage.mget:mget remote-filespec
desc.mkdir:Attempts to create a new directory on the remote host.
usage.mkdir:mkdir directory-name
desc.nobell:Turn off bell notification when end of file transfer.
desc1.nobell:Default = nobell.
usage.nobell:nobell
desc.open:Starts ftp session with remote host name, ip address, or presaved
desc1.open:profile name.
usage.open:open server-address [login-id [password [remotedir [local-dir]]]]
usage1.open:or
usage2.open:open profile
desc.profiles:Displays the list of currently saved profiles.
usage.profiles:profiles
desc.prompt:Force interactive prompting on multiple commands and
desc1.prompt:confirmation of overwrites.
usage.prompt:prompt
desc.put:Upload specified file, multiple files or whole directory recursively.
usage.put:put local-filespec [remote-filespec]
desc.putnewer:If on, uploads only files with a newer date and timestamp.
usage.putnewer:putnewer
desc.pwd:Display the name of the current working directory on the
desc1.pwd:remote machine.
usage.pwd:pwd
desc.quit:Exit the program closing any open session.
usage.quit:quit
desc.quote:Sends the contents of 'string' direct to the control channel.
usage.quote:quote string
desc.read:Displays a text file in an editor window
usage.read:read remote-file
desc.reconnect:Attempts to reconnect a session after the server has timedout.
usage.reconnect:reconnect
desc.recv:Retrieve the remote file and store it on the local machine.
desc1.recv:A synonym for get.
usage.recv:recv remote-file [local-file]
desc.reget:Reget the rest of the remote-file and append it to the partially
desc1.reget:downloaded local-file.
usage.reget:reget remote-file [local-file]
desc.rename:Rename the file 'from' on the remote machine, to the file 'to'.
usage.rename:rename from to
desc.rhelp:Display what help is available from the remote site.
usage.rhelp:rhelp [command]
desc.rmdir:Remove an empty directory on the remote host.
usage.rmdir:rmdir directory-name
desc.rstatus:Show the current status of the remote ftp server.
usage.rstatus:rstatus
desc.runique:Toggles storing of unique filenames on the remote site.
usage.runique:runique
desc.save:Saves the current profile configuration, inc current remote and local
desc1.save:paths.
usage.save:save profile
desc.send:Upload specified file.
desc1.send:A synonym for put.
usage.send:send local-filename [remote-filename]
desc.site:Allows you to send system specific commands.
usage.site:site arg1 arg2 ...
desc.size:Return size of filename on remote machine.
usage.size:size filename
desc.status:Show the current status of sftp.
usage.status:status
desc.system:Show the type of operating system running on the remote machine.
usage.system:system
desc.user:Identify yourself to the remote host.
usage.user:user user-name [password]
desc.verbose:Toggles display of server messages on and off.
usage.verbose:verbose
desc.version:Display the current program version.
usage.version:version
desc.view:Displays a text file in an editor window.
desc1.view:A synonym for read.
usage.view:view remote-file